calley

New Members
  • Content Count

    2
  • Joined

About calley

  • Rank
    Newbie

Personal Information

  • Country / State:
    New Zealand
  1. This has been answered via email thanks so a mod can remove this post.
  2. Hi We're using your TPA-PAF (TwistPort™ Adaptor for Rocket Prism 5AC and airFiber® 5X) with your RF Elements 5GHz Gen2 Symmetrical Horn 30 Deg Sector Antennas. These are usually positioned on our poles 20 degrees apart e.g. Remote End Bearing (True North) Antenna Type ap-a 0° Ubiquiti 5GHz Rocket AC PRISM Gen2 with RF Elements 5GHz Gen2 Symmetrical Horn 30 Deg Sector Antenna and TwistPort Adaptor ap-b 20° Ubiquiti 5GHz Rocket AC PRISM Gen2 with RF Elements 5GHz Gen2 Symmetrical Horn 30 Deg Sector Antenna and TwistPort Adaptor ap-c 40° Ubiquiti 5GHz Rocket AC PRISM Gen2 with RF Elements 5GHz Gen2 Symmetrical Horn 30 Deg Sector Antenna and TwistPort Adaptor What we have noticed recently is GPS will not sync for radios (in particular the twistport adaptor/GPS antenna underneath the previous twistport adaptor/GPS antenna - blocking LOS to the sky) situated directly underneath their previous AP. This is assuming for example AP-A is on top of the pole, AP-B below that, and finally AP-C below AP-B. I note ubiquity's guidelines on maintaining GPS sync are: Note: Ensure that the GPS Antenna has clear line of sight to the sky for proper GPS reception. Do you have a recommendations on how we should install multiple 30 degree horns with your twistport adaptors for optimal GPS sync? We have found through trial and error moving an AP so it's twistport adaptor/GPS antenna is not directly being blocked to the sky has helped with radios not achieving GPS sync, but wonder if you have a bearings guideline when stacking multiple radios/twistports/30 Deg horns. Cheers, C