WIFI.TEAM

There is no only way to solve a problem. We tested many ways, many equipment... and then we solve the deployment. 1. Yes XL CARRIERCLASS is used as AP and is the best solution, the signal is OUTSIDE the decks and send the signal inside. All de ceiling or indoor solution requires to put one cord throw the sealed doors. With our solution all the AP are outside and no need to pass cords across the sealed doors. The RF signal with de XL CARRIERCLASS is EXCELENT and is capable to reach 2 decks with one AP. 2. Wrong, the ships moves, not a long distance 50-100m, this is the reason to use the horns with 30º. Horns are capable to reach the signal in that case without need of repositioning or move the PtP horn. 3. Only one netmetal in PtP, the another are Mikrotik inside XL CARRIERCLASS and all the solution is conected with a POE switch, only 1 in the ship. 4. All equipment is in good state, you need to protect and not damage the bolts in the second tight.... use the correct tools and the needed force. 5. All the solution is linked from outside the indoors, this is the best solution to avoid sealed doors, distribution inside, meters of cords... We can mount and umount all the solution in less than 1 hour. The other providers and solutions requires to deploy too much cords, ceilings, meters of cords... TIME IS MONEY, and de RF singnal is below our solution. 6. Ships has 110v or 220v. Use the correct conversor to our standart in spain who is 220v All your alternatives can be possible, test it and improve it, but we are proud to say we make a working one....