bearm Posted September 13, 2016 Report Share Posted September 13, 2016 Last week I deployed 3 RockShields at an existing tower site with Ubnt Rocket M5 radios. I feel the 4 small Phillips screws (for the bottom plate) might be better replaced with a screw providing a better fit (Allen/hex or Torx/star) allowing for less slip. I realize Phillips is common place and customers wouldn't want a screw requiring an "exotic" driver or tool. (Your RFe Symmetrical Horn sectors use Allen hex bolts!) On top of needing to pull the sides of the shield so the screw holes would line up, the screws went in rather hard. I used a Klein 11-in-1 screwdriver with a PH#1 (smallest Phillips driver). I did my best to spin them backward so they dropped in straight and not slightly sideways. I ended up pinning the shield kit to my leg to exert more pressure while running the screw in. Thanks for considering my suggestion (or suggesting an alternate bit or tool). - Mike Quote Link to comment Share on other sites More sharing options...
Tasos Posted September 13, 2016 Report Share Posted September 13, 2016 Mike, Thanks for sharing your feedback. We love to see suggestions from the field that can help better our products! We will consider this and see what can be done to improve the ability of assembling the Rock Shield. On the Horns, Did you know we offer 2 tools to help with deploying them? We have a special short Allen Hex Key and also a custom Ratchet. Both of these are available in stock at our Distributors and make installing our Horns super simple. See here: http://www.rfelements.com/products/antennas/reversible-ratchet-wrench/reversible-ratchet-wrench/ http://www.rfelements.com/products/antennas/hex-key-5x16x200mm/hex-key-5x16x200mm/ Quote Link to comment Share on other sites More sharing options...
bearm Posted September 13, 2016 Author Report Share Posted September 13, 2016 2 minutes ago, Tasos said: Mike, Thanks for sharing your feedback. We love to see suggestions from the field that can help better our products! We will consider this and see what can be done to improve the ability of assembling the Rock Shield. On the Horns, Did you know we offer 2 tools to help with deploying them? We have a special short Allen Hex Key and also a custom Ratchet. Both of these are available in stock at our Distributors and make installing our Horns super simple. See here: http://www.rfelements.com/products/antennas/reversible-ratchet-wrench/reversible-ratchet-wrench/ http://www.rfelements.com/products/antennas/hex-key-5x16x200mm/hex-key-5x16x200mm/ Thanks for considering my suggestion. I didn't realize those 2 tools existed! Much appreciated. Thanks, Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.